1. Electric performance:
   Mechanical Performance to specification of BS4579 part 1.3-1976
2. Materials:
   Copper to specification material BS41041970 Aluminium Material specification BS2627-1970
3. Copper crimp lug and link is suitable for BS6360-1973 the connection of strand conductor. aluminium lug and link is suitable for BS6791-1973 the connection of strand conductor. Sector aluminium lug is suitable for BS3988-1970 the connection of 3core, 4-core sector solid conductor.
4. Copper lug to specification BS 91- 1973, tinned surface.

Application

For the connection of the aluminium conductor of power cable or electric wire, with normal cross section area from 6 to 1000㎟, to the copper
busbar of electrical equipment.

Features

Material: high purity aluminium, with ≥99.6% high purity aluminium, ≥ 99.9% high  purity copper. For the transition part by using low temperature friction welding. The strength of the weld is at least equal to the strength of the base aluminium material. The surface of aluminium is given a special chemical treatment to reduce contact resistance and inhibit corrosion, the inner surface of lug barrel has conductive paste in it to prevent corrosion and oxide layers forming. A plastic end cap is provided for sealing and protecting.
　

Application :

The hydraulic crimping pliers is a special and manual tool for the cold-pressure of wire and cable. It is suitable for installation of cable end and intermediate joints and not limited by the flameproof requirement

Feature :

This series of crimping pliers is hydraulically driven. It has the advantages of light and large force. QYS-12-2 type hydraulic crimping pliers has produced for more than 20years. Its performance is good by using import jointing QYS-300-1 Hydraulic pliers is a tool for cold-pressure of wire and cable. It has the advantages of larges force. Light and fast crimping. The method of crimping is hexagonal compressed connection. And it has no damage to pressed connector and the cable core. It is special for the installation of heat shrinkable and pre-molded accessory. Now it is the ideal tool for cold-pressure of wire and cable

　

Application :

Suitable for cutting of power cable with armor, communication cable, control cable, bare copper aluminium strand (no ACSR).

Features :

It is a whirling knife, mechanical driven. So, it is efficient, save effort in operating, but QLD-30 is not suited to power cable with armor.

LTD35-60 Cutting Plastic Knife
It is special for cutting the cab1e insulating layer. It can adjust the blade angle (0℃ ~ 10 ℃) and the deep of radia1 feed (0~12mm). No damage to the cable core and suitable for the cable OD, ∮35~ ∮6Omm.

LBD3560 Stripping Plastic Knife It is special for stripping outer semi-conductor layer of ∮35~ ∮6Omm cable insulation. No damage to the insulating layer

Application:

The mechanical crimping pliers is a special and manual tool for the cold-pressure of wire and cable. It is not limited by the Flame proof and fireproof requirements.

Features :

This series of crimping pliers is mechanical driven. When the connecting connector reaches the depth required, the pressing die can only reset, so good quality is ensured. This pliers has the advantages of light weight, large force, easy operation and service. Type QX-18, QX-24, are suitable for pressing copper or aluminium core power cable.